Installation – 3 Glass System

Step by step Installation Guide

Step 1 – Unpack Stand

Step 02 – Remove Top Retro

Step 03 – Remove Bottom Retro

Step 04 – Fill Water Tray
Ensure that the water level is between 1.5”–2” (4-5cm)

Step 05 – Replace Bottom Retro

Step 06 – Apply Silicone
Apply a light coat of silicone spray to the metal surface.

Safety Note:
Follow instructions on the spray can.
Allow the silicone to dry before relighting candles.

Set the bottom retro securely aside.

Step 07 – Replace Top Retro
When positioning the top retro:
Ensure the front edge is placed first, followed by the back supports.

Step 08 – Insert Outer Glass

Step 09 – Insert Middle Glass

Step 10 – Insert Inner Glass

Step 11 – Prepare Candles

Place the box on lower shelf of your stand.

Final Step
Light a candle.
Your candle stand is now fully installed and ready to welcome every prayer and intention.